Replacing RISC PSUs with ATX: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

4 November 2023

  • curprev 01:3001:30, 4 November 2023‎ Daghdha talk contribs‎ 3,395 bytes +3,395‎ Created page with "== Overview == Power Supplies for RISC systems like the RS/6000, SPARC, Alpha, etc have an increasing risk of failure due to leaking capacitors. The most common fix is to replace the capacitors in the PSU before they leak and destroy the logic board. This does require good re-soldering skills and being comfortable working with high(110V or 220V) voltage components. For those who are not comfortable doing that or if the PSU is beyond repair, it is possible to replace the..."
Retrieved from "https://wiki.restless.systems/wiki/Replacing_RISC_PSUs_with_ATX"