OS/2 Versions And History

From DisNCord Community Wiki
Jump to navigation Jump to search

This is a list, chronologically sorted, of OS/2 versions, related products, and historic dates.

IBM PC DOS 3.0 (1984)

The release of the IBM Personal Computer/AT in 1984 meant the introduction of the advanced Intel 80286 CPU to the PC market, along with 5.25-inch 1.2 MB diskette support (and later 3.5-inch diskette support). However, DOS 3.0 was only a minor improvement to DOS 2.x, featuring support for 1.2 MB diskettes and hard drives up to 32 MB.

Most importantly, DOS 3.x doesn't use the protected mode feature of the 80286, running in real mode instead, which was supposed to be there only for bootstrapping. This might have been due to Intel initially creating the 80286 (called iAXP 286 at the time of its release) to be used not in personal computers, but in multi-user multitasking systems. Thus, users of the PC AT ended up waiting until 1987 for a protected-mode successor of DOS, being left with real-mode DOS and Xenix until then.

Multitasking DOS 4

The first known appearance of the Session Manager in Multitasking DOS 4.

For more detailed information about this version of DOS, see Multitasking DOS 4.

Officially called just MS-DOS 4.00, Multitasking DOS 4 was the intended successor of DOS 2.x and later 3.x, initially developed between January 1983[1] and November 1985. Despite still running in real mode, it has many features later appearing in both OS/2 and Windows, including:

  • the New Executable format
  • an OS/2-style per-task data area (PTDA) replacing the MS-DOS program segment prefix (PSP)
  • system calls using dynamically linked functions in a built-in module named DOSCALLS
  • the concept of processes along with related system calls
  • the use of a higher-level language (C) for writing parts of the operating system.

However, unlike any version of OS/2 released to the public, both earlier MS-DOS COM and MZ executables and MS-DOS interrupts are supported on Multitasking DOS 4, and there are even improvements to these APIs (some of which break compatibility with older DOS versions). New apps use both the legacy (int 21h) and new dynamically linked APIs, perhaps suggesting the old API was deprecated or in the process of being replaced.

It was originally called DOS 3.0, which is referenced by older binaries checking for DOS 3.0 to 4.0; later the release number was pushed to 4.0 with the release of 3.0.

This version of DOS supports pre-emptive multitasking, but its usability is limited by the 640kB memory limit, with no swapping because of lack of necessary hardware support. For this reason, it was only released to certain OEMs, opting to wait with the public release for its protected mode successor[2].

Multitasking Support

Multitasking DOS 4 adds new system calls to manage a multiprocess system, namely for:

  • shared memory
  • semaphores
  • sleep and wait on child
  • signal handlers and sending signals
  • process priority

In addition to the usual CON device for the screen, split devices SCREEN$ and KEYBD$ were introduced; the user can switch between multiple sessions, each having its own screen. The DETACH command was added to support running processes in the background; these are still allowed to write onto their attached screen, but can't read from STDIN.

New APIs

A module built into the kernel called DOSCALLS was introduced in Multitasking DOS 4, containing a limited number of functions implementing new features of the DOS kernel. If you know a little about OS/2 API, this will be familiar to you. Note that some of the functions being prefixed with DOS and some not. Here's a full list of DOSCALLS exports:

1	ALLOCSEG
2	REALLOCSEG
3	FREESEG
4	LOCKSEG
5	UNLOCKSEG
6	GETSEGSIZE
7	GETDSHANDLE
8	CRITENTER
9	CRITLEAVE
10	FCRITENTER
11	FCRITLEAVE
12	PBLOCK
13	PRUN
14	SUBSCREEN
15	GETPIDS
16	DOSDISCARDCODE
.17	DOSGETHANDLE
18	DOSHANDLEJUMP

The rest of the new functions (e.g. semaphores) are only implemented as INT 21h calls. Some functionality is also implement as exported functions from SM.EXE (Session Manager) and POPUP.EXE.

OS/2 Pre-Betas

ADOS 5.0, internal revision 7.68

The first known version of protected-mode DOS (called 286DOS in some internal materials) is from October 1986, which is quite late compared to both the release of the PC AT and the development of Windows 1.0 and DOS 4.0. Using the same internal revision format as DOS 4.0, it identifies itself as internal revision 7.68, which is consistent with the known internal revision of DOS 4.0 being 6.7. There is no clear name; boot screen identifies the system as CP-DOS 1.0, while the command interpreter identifies the system as ADOS 5.00.

Feature-wise, ADOS 5.0 is a continuation of DOS 4.0, keeping e.g. New Executable, the DOSCALLS in-kernel module, Session Manager, and SCREEN$ device (KEYBD$ seems to be missing from internal revision 7.68). The default prompt is X], which is different from the standard X>, X:\>, and [4.0 X:\>] prompts used by DOS. A significant difference is the absence of any interrupt-based API in protected mode, all of which was moved to DOSCALLS or several userspace modules[3]:

  • BKSCALLS.EXE - Base Keyboard Subsystem
  • BMSCALLS.EXE - Base Mouse Handler
  • BVSCALLS.EXE - Base Video Subsystem
  • KBDCALLS.EXE - Keyboard Router
  • MONCALLS.EXE - Monitor Calls
  • MOUCALLS.EXE - Mouse Calls
  • QUECALLS.EXE - Queue Calls
  • VIOCALLS.EXE - Video Calls (VIO subsystem)

Session Manager (SM.EXE in DOS 4.0) was split into SESMGR.EXE and SHELL.EXE. SESMGR is a module linked by any program that wants to act as a session manager; internally it uses DOSCALLS, KBDCALLS, MOUCALLS, and VIOCALLS routines to handle that. This allows custom shells to be written; SHELL.EXE is the system-provided shell, in appearance very similar to SM.EXE.

This build expects a hard drive with a C:\MTDOS directory to be present, throwing (non-fatal) errors if it isn't there. The name MTDOS might be an indication of the system still being called by the name of its predecessor, Multitasking DOS, internally by the developers.

To provide binary compatibility with real-mode DOS, ADOS 5.0 introduces a separate, real mode environment, identifying itself as CP/DOS Version 5.00. For this purpose, the protected mode command line interpreter was renamed to CMD.EXE, COMMAND.COM being used for the real mode interpreter. PROTMODE has to be set to yes in CONFIG.SYS in order for the DOS mode to be available; it then appears in the session manager menu as COMMAND.COM R.

ADOS 5.0, SIZZLE internal revision 7.68.18

Later in December 1986, internal revision 7.68 got another build with a version number 7.68.18, codenamed SIZZLE. It is said to improve overall performance[4], and contains an updated version of the real mode shell, which fixes the prompt glitch from 7.68 and now identifies itself as The IBM Personal Computer DOS Version 5.00.

The build no longer relies on files on the hard drive, running fully from a diskette. Microsoft C Compiler 3.00.17 is bundled with the build in the DOS3TOOL directory.

IBM OS/2 1.0

MS OS/2 1.0

TODO: Document neozeed's and NCommander's exporation results

IBM OS/2 1.1

MSOS/2 1.2

References